Frosty the Snowman Tiny Book and Tiny Box with Eileen Hull’s Inspiration Team

Happy Christmas in July!!!
Are you keeping caught up on all the excitement over Eileen’s newest Christmas Dies?
IF YOU DIDN’T KNOW…
July 1st Eileen  released  her new Christmas Collection with Sizzix!!!
Eileen’s Inspiration Team has been busy creating and sharing some fabulous projects and tutorials!!!
Don’t worry if you missed out just go to Eileen’s Blog to catch up. 
I used  Sizzix ScoreBoards L Die – Box, Mitten Item #664510 for the fun ric rac on my Frosty the Snowman Gift Card Box with Tiny Book! 
Cover matboard on both sides using adhesive sheets and pattern paper. . 
Die cut one snowman using Eileen Hull’s  Sizzix ScoreBoards L Die – Box, Snowman Item #664511.
Decorate snowman with pattern paper and bits of covered mat board. 
Tiny Book Case Die
Cover matboard on both sides with adhesive sheets and pattern paper.
Adhere prepared Frosty the Snowman to cover of prepared Tiny Book. 

Tie twine label to top of notebook. 

Add Epherema pieces to front of prepared notebook. 

Tie twine bow to hold tony box closed. 

Frosty Tiny Book


Sizzix ScoreBoards Die – Tiny Book

Item #664423Cover matboard on both sides with adhesive sheets and pattern paper.
Die cut and form Tiny Book. 
Add more of the fun ric rack from the Mitten Box Die along with an Epherema piece. 

Create pages for inside by cutting 3″ x 12 piece of pattern paper. 
Score at 2″, 4″, 6″, 8″ and 10″ score lines. 
Accordion fold paper. 

Adhere smaller mats and borders to mats; adhere to folded pages. 

Add to inside of Tiny Book with twine. 
Fold pages to fold inside of book. 
Add Frosty Tiny Book to inside of prepared Frosty Tiny Box.

Make sure to check out all of Eileen’s products on the Sizzix site or in her Etsy Store. 
ALSO….
Stop by Eileen Blog to check out the EH Inspiration Team fabulous and inspiring projects
HERE!
Join us on over Eileen Hull’s Fan Group HERE  to see more fabulous projects from her amazing and talented fan base!!! 
Join in on the fun and prizes!!!  
Enjoy! Pam 


Supplies:
Eileen Hull/Sizzix ScoreBoards L Die – Box, Mitten Item #664510
Eileen Hull/Sizzix ScoreBoards L Die – Box, Snowman Item #664511
Eileen Hull/Sizzix ScoreBoards L Die – Tiny Book CaseItem #664424
Eileen Hull/Sizzix ScoreBoards Die – Tiny Book – Item #664423

Eileen Hull/ThermoWeb Adhesive
Sizzix Mat Board
Authentique Frosty Collection
Teal Twine
Clear Gemstones
Scoreboard

DISCLAIMERS

This blog is compensated to provide opinion on products, services, websites, and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements. I always give my honest opinions, findings, beliefs, or experiences on those topics or products. The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question/This blog contains affiliate links, clicking and shopping through these links helps to support and run Pam Bray Designs – Scrapbook Flair Blog at no additional cost to you. Today’s features are Eileen Hull Designs Products.

Roses and Lace Easel Desktop Display Organizer with Eileen Hull

Happy New Years!!!
Let’s celebrate by sharing in  Eileen Hull latest dies from Sizzix! 
WELL…
Actually Eileen’s Inspiration Team will be celebrating the whole month sharing unique ways to use them!
 First up is the Display Stand
It’s super easy to use and cuts in one piece!
It can be flattened to send in the mail; how fun is that!!!

Sizzix/Eileen Hull Display Stand

Use Eileen’s ThermoWeb ECraft Easy Cut Adhesive on the front and back of a piece of chipboard prior to cutting. 

Adhere pretty pattern paper to the front and back of adhesive chipboard; die cut using the Display Stand!

EASY PEAY!!!!
NOW FORM THE DISPLAY STAND AND DECORATE!!!

Adhere paper doily to back of Display Stand. 

Cut a 1″ x 5″ chipboard to fit across the top of Display Stand. 
Using Eileen’s ThermoWeb ECraft Easy Cut Adhesive to top; add pattern paper. 
Add to front of Display Stand with pop dots. 

Trim 3″ x 5 1/4″ Notebook to measure 3″ x 3 1/2″ 

Decorate with pretty pattern paper and layer extra images to top with pop dots. 

Cut 1″ x 5 1/2′ piece of chipboard to fit the bottom part of the Display Stand to create a front. 
Cut piece of pattern paper to fit; punch border on top of pattern paper. 
Using Eileen’s ThermoWeb ECraft Easy Cut Adhesive to top; add pattern paper. 
Adhere front of Display Stand. 
Adhere tan twine to bottom of prepared Display Stand. 

Adhere small twine bows to Display Stand. 

 

Fussy cut “Memories” or add different sentiment to front of Display Stand. 

Add your favorite pens, business cards, small notebooks or other items to your personnel tabletop Desk Stand. 
Make sure to check out all of Eileen’s products on the Sizzix site or in her Etsy Store.
ALSO….
Stop by Eileen Blog to check out the EH Inspiration Team fabulous and inspiring projects HERE!!!!
OR…
Join us on over Eileen Hull’s Fan Group HERE  to see more fabulous projects from her amazing and talented fan base!!! Join in on the fun and prizes!!!
Hugs Pam 

Supplies:
Sizzix/Eileen Hull Display Stand
ThermoWeb ECraft/Eileen Hull Easy Cut Adhesive
Sizzix Matboard
Stamperia Roses and Lace Paper Collection
Tan Twine
Markers
Pop Dots
Paper Doily


****Products Linked in Affiliate Supply List for convenience****


DISCLAIMERS


This blog is compensated to provide opinion on products, services, websites, and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements. I always give my honest opinions, findings, beliefs, or experiences on those topics or products. The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question/This blog contains affiliate links, clicking and shopping through these links helps to support and run Pam Bray Designs – Scrapbook Flair Blog at no additional cost to you. Today’s features are Eileen Hull Designs Products.

Get Candy Treat Container with Eileen Hull Inspiration Team


Happy Tuesday!!! 
Eileen Hull’s Inspiration Team is so excited to share our favorite Halloween/Fall projects the whole month of October! 
I am sure you will be delighted to see how Eileen Hulls Inspiration Team has combined her dies to create some fun and fabulous projects!


Today I created a fun Candy Treat Container using Eileen’s Trinket Box Die from Sizzix along with ThermoWeb Adhesive Sheets.

Cover mat board with ThermoWeb Adhesive. 
Add pattern paper to top of prepared chipboard. 
Die cut Trinket Box Pages from prepared chipboard to form container. 
Adhere ThermoWeb Adhesive behind pattern pumpkin on paper. 
Die cut pumpkin from pattern paper using circle die or punch using circle punch.

Adhere larger circle to top of prepared container. 
Add prepared circle to top of container. 
Fussy cut second set of eyes and mouth from pattern paper. 
Add to top of pumpkin with pop dots. 
Cut 2 small labels from the Bookplate Die to form leaves. 

Add leaves to top of pumpkin. 

Add twine bow to top of pumpkin. 

Cut two small rectangle pieces of pattern paper that will fit around Life Savers. 
Add ThermoWeb Adhesive to back of pattern paper. 
Wrap Life Savers with prepared paper. 

Cover both pieces of candy. 

Add small adhesive strips to back of Life Savers. 

Add to inside of book. 

Add small labels to top of candy wrappers. 

Punch small holes in front and back of prepared candy container. 
Add ribbon to form bow to hold closed. 

Add adhesive behind yellow paper; die cut label out. 

Add sticker to front of paper. 


Stop by Eileen’s Blog to see all the fabulous projects that will be shared all month long! 

Pam

Supplies:
May Arts Tan Twine
Circle Punch
SRM Halloween Stickers
Pop Dots



(Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration  Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.)

Creepy Altered Needlebook Candy Container with Eileen Hull Inspiration Team

Happy Tuesday!!! 
Did you enjoy last weeks Halloween/Fall projects from Eileen Hull’s Inspiration Team! 
If you missed anything make sure to check them out! 

I am sure you will be delighted to see how Eileen Hulls Inspiration Team has combined her dies to create some fun and fabulous Halloween/Fall projects.


Begin by covering a piece of chipboard with ThermoWeb Adhesive Sheet. 
Run prepared chipboard and Needlepoint Book Die through die cut machine.

To create inside detail of  Needlepoint Book Die place pattern paper on top of  Needlepoint Book Die and platform.

Add platform to top; place shim to top…this will allow the paper score lines to cut through.
Adhere pattern paper to inside of prepared chipboard.

For outside cover; add ThermoWeb Adhesive Sheet 
to pattern paper; die cut out. 
Remove adhesive and add to front

Ink edges with Clearsnap Colorbox Nutmeg Blends Ink.

Wrap candy bar with pattern paper.


Cut a  piece of ThermoWeb Adhesive Sheet  to fit on back of candy bar.
 Add covered candy bar to inside of Needlebook.

Decorate front of  Needlepoint Book with circle from the Bookplate, Hinges & Label Die set.

Fussy cut web and spider from pattern paper; add to front of Needlepoint Book.

Add sticker to pattern paper; add a small piece of  ThermoWeb Foam Adhesive Sheets to back; die cut using label from the Bookplate, Hinges & Label Die.


I hope you are inspired by today’s fun Halloween Needlebook Candy Container and want to creates few for your favorite Trick or Treaters. 
Stop by Eileen’s Blog to see all the fabulous projects that will be shared all month long! 
Pam


Supplies:

SRM Stickers

Pop Dots


(Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration  Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.)

Spooky Bookplate Candy Container with Eileen Hull Inspiration Team!


Happy Tuesday!!! 
Eileen Hull’s Inspiration Team is so excited to share our favorite Halloween/Fall projects the whole month of October! 
I am sure you will be delighted to see how Eileen Hulls Inspiration Team has combined her dies to create some fun and fabulous projects!

Spooky Bookplate Candy Container
Die cut 2 of the  Bookplate, Hinges & Label Die tags.
Adhere a piece of ThermoWeb Adhesive to pattern paper; die cut one circle form pattern paper. 
Bend circle up about a 1/2″ and attach tags to circle to form sides of container. 

Place 3 candy bars in small plastic bag. 
Adhere to back or tag using the ThermoWeb Adhesive Sheets.

Repeat on the front of plastic bag. 

Adhere top of tags together. 
Punch holes for bow. 
Add bow. 

Die cut circles from the  Bookplate, Hinges & Label Die using pattern paper. 
Adhere largest circle to front of container using the ThermoWeb Adhesive Sheet. 
Add small circle to front with pop dots.

Stop by Eileen’s Blog to see all the fabulous projects that will be shared all month long! 
Pam

Supplies:

662356 Eileen Hull/Sizzix Bookplate, Hinges & Label D
ThermoWeb Adhesive Sheets
Authentique Tricky Pattern Paper
Clearsnap Colorbox Ebony Blends Ink
May Arts Green Ribbon
SRM Halloween Stickers
Pop Dots

(Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration  Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.)