Photo Display Standy with Eileen Hull Inspiration Team

Hello everyone!!!
Have you been designing or following along with Eileen Hull Inspiration Team using her new dies from Sizzix? 
If you are designing we would love to see your fabulous creation over on Eileen Hull Fan Club…all you need to is join and answer the two simple question. 
We would love to have you!!!
If you are stopping by to check things out…
WELL… make sure to checkout all of Eileen’s fabulous Inspiration Team that share projects each week on their blogs but the links are HERE on Eileen’s!

So without further delay…let’s create a Botanical Tea Photo Display Stand!
Begin by adhering pattern paper to both sides of matboard.
 (I used my Xyron creative Station and ran the matboard through.)

Adhere chipboard to front of Display Stand prior to adding Trinket Box Frame. 

Adhere pattern paper to matboard. 
Die cut frame from Sizzix/Eileen Hull Trinket Box Die
Add to top of prepared Display Stand with pop dots.
(Make sure to just add narrow pieces on edges of frame and on left side.) 

Add sticker from the Botanical Tea to bottom ledge of Display Stand

Create slide photo mats to fit under Trinket Box Frame. 
Add photos, display pieces extra to mats. 

Layer flowers together; adhere to Display Stand. 

Add a few fussy cut butterflies from pattern paper to Display Stand. 
Add centers to flowers. 

I hope you are inspired by my Display Stand. 
I have placed links in the supply list. 
Enjoy Pam

Supplies:
Sizzix/Eileen Hull Display Stand
Sizzix/Eileen Hull Trinket Box Die
Sizzix/Eileen Hull Flower and Leaves Journaling Card Die
Sizzix Matboard
Graphic 45 Botanical Tea Collection
Southern Ridge Trading Company Spring Fresh Swirl Corners
Clear Gemstones
Xyron Creative Station with Permanent Adhesive
Pop Dots

DISCLAIMERS

This blog is compensated to provide opinion on products, services, websites, and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements. I always give my honest opinions, findings, beliefs, or experiences on those topics or products. The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question/This blog contains affiliate links, clicking and shopping through these links helps to support and run Pam Bray Designs – Scrapbook Flair Blog at no additional cost to you. Today’s features are Eileen Hull Designs Products.
Advertisement

Get Candy Treat Container with Eileen Hull Inspiration Team


Happy Tuesday!!! 
Eileen Hull’s Inspiration Team is so excited to share our favorite Halloween/Fall projects the whole month of October! 
I am sure you will be delighted to see how Eileen Hulls Inspiration Team has combined her dies to create some fun and fabulous projects!


Today I created a fun Candy Treat Container using Eileen’s Trinket Box Die from Sizzix along with ThermoWeb Adhesive Sheets.

Cover mat board with ThermoWeb Adhesive. 
Add pattern paper to top of prepared chipboard. 
Die cut Trinket Box Pages from prepared chipboard to form container. 
Adhere ThermoWeb Adhesive behind pattern pumpkin on paper. 
Die cut pumpkin from pattern paper using circle die or punch using circle punch.

Adhere larger circle to top of prepared container. 
Add prepared circle to top of container. 
Fussy cut second set of eyes and mouth from pattern paper. 
Add to top of pumpkin with pop dots. 
Cut 2 small labels from the Bookplate Die to form leaves. 

Add leaves to top of pumpkin. 

Add twine bow to top of pumpkin. 

Cut two small rectangle pieces of pattern paper that will fit around Life Savers. 
Add ThermoWeb Adhesive to back of pattern paper. 
Wrap Life Savers with prepared paper. 

Cover both pieces of candy. 

Add small adhesive strips to back of Life Savers. 

Add to inside of book. 

Add small labels to top of candy wrappers. 

Punch small holes in front and back of prepared candy container. 
Add ribbon to form bow to hold closed. 

Add adhesive behind yellow paper; die cut label out. 

Add sticker to front of paper. 


Stop by Eileen’s Blog to see all the fabulous projects that will be shared all month long! 

Pam

Supplies:
May Arts Tan Twine
Circle Punch
SRM Halloween Stickers
Pop Dots



(Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration  Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.)

Party Card and Favors with Eileen Hull Inspiration Team

 Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration  Design Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.


Welcome Eileen Hull Fans!!! It is week two of April Showers Party theme using Eileen Hull Dies from Sizzix. I hope you enjoyed last week inspiring projects from the Inspiration Team. 

I created a  “Party” Invitation Card using Eileen’s Trinket Box, Spring Flowers & Leaves,  and Bird Die using Graphic 45 Café Parisian Collection.

Layer pattern paper to card base along with prepared Trinket Box lid to top. Create flowers and add to card along with twine bows.

Cut letters from Homemade Alphabet; add to front of card.

Add bird to top of card along with a few more flowers and leaves. 

To finish your party card add a small chipboard piece to front.

Candy Cup Party Favor

Die cut Candy Cup from Matboard, cover with pattern paper. Add flowers to front of candy cup.

Cover small dowel with pattern paper; add small chipboard embellishments along with flower to top.
Fill with candy!

Flower Pocket Party Favor


Die cut Flower Pocket Die from mat board; cover with pattern paper. Add Hydrangea flowers to box.

Place chipboard to front along with a flower and leaves.

Fill with your favorite cookies.

Tie top with twine.

Add flower to top. I hope you are inspired to create some fun “Party” Cards and Favor Boxes. I also added the link to last weeks post incase you missed it. Enjoy! Pam

Supplies:
Hole Punch
Antique Brads
Tweezer


Party Banner with Tutorial – Eileen Hull Inspiration Team

Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull’s Inspiration Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.

Welcome Eileen Hull Fans!!! April Showers is the theme this month using Eileen Hull Dies from Sizzix. Our challenge is to create projects with a Party Theme using dies! So let the “PARTY” begin with a Party Banner!

To begin your “Party” Banner die cut 5 of the Trinket Box lids from mat board. 
Cover both sides of lid with pattern paper to form banner.  

Apply adhesive to back of pattern paper. Die Cut 5 different Bookplates form paper. Add to top of prepared banner. 
 Add scallop border to top of banner. Punch hole for strings to form hanger. 

 Cover each of the ovals from the Trinket Box lid with different Epherema pieces. 

 Die cut scallop circles from Bookplate, Hinges & Label to hold banner pieces together. 

Fussy cut like images form Epherema cards; add to top of banners with pop dots.

Add Hydrangea  flowers to center of each of the scallop circles along with some Spring Leaves. 

Die cut “Party” from the Homemade Alphabet Die. Add to top of center banner.

I hope you are inspired to create some fun “Party” Banners or other themed banners using the Trinket Box along with other Sizzix Dies. Hugs Pam

Supplies:
Eileen Hull/Sizzix #659866 Homemade Alphabet
Eileen Hull/Sizzix #662356 Bookplate, Hinges & Label Die
Eileen Hull/Sizzix #662360 Book & Pages, Trinket Box & Frame Die
Eileen Hull/Sizzix #661111 Spring Leaves Die
Eileen Hull/Sizzix #657721 Borders & Hydrangea Die
Sizzix Little Sizzles Chipboard
Graphic 45 Café Parisian Collection
Xyron Creative Station with Permanent Adhesive
Xyron Mega Adhesive 
Hole Punch
Antique Brads
Tweezer

Steampunk Debutante Desk Organizer with Eileen Inspiration Team

Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull’s Inspiration Design Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.


Are you enjoying all the inspiration from Eileen Hull Inspiration Team!!!
If you missed last week’s projects make sure to check them out on Eileen Hull Designs Blog!
What can I say….
BUT…
AMAZING!!!
I hope you continue in all of our excitement as I 
share with you how to create a Steampunk Debutante Desk Organizer using Eileen’s Journal Die!!!
BEST PART….
It is super easy….

Begin by cutting 2 sets of Journal Die from Matboard. 
Adhere together at the bind. 

Open up flat and adhere a 2″ piece of scrap pattern paper to hold the Journal  together. 
Turn over and repeat on back. 

Cover inside with pattern paper! 
Just like that you have the beginnings of a Desk Organizer!!!

INSIDE OF ORGANIZER!
 Now the fun part….the inside pages!

This is the back of the Trinket Box, more details on it when we close the covers to decorate the front. 
BUT…
I wanted to show that you decorate with a few stickers. 

First Inside Page!

Ink all the pages and pieces with Colorbox Blends Nutmeg Ink. 

Add flower border strips to each page. 
Add a fussy cut butterfly to the top of page. 
Die cut and decorate the Stamp and Photo Storage with pattern paper and Epherema Cards

Decorate a premade journal with pattern paper. 
Add to inside of organizer with elastic to hold it into place. 

Decorate with images and butterflies from the pattern paper. 

Die cut a Caddy Box; trim down length and sides  to fit business cards inside. 
Decorate with pattern paper. 
Add to back of organizer so the image is peeking over the top. 

Create a Stamp and Photo Storage  for note cards. 
It is the perfect size; adhere to bottom of inside organizer. 
Decorate with chipboard, stickers and butterflies. 

Cover another premade journal with pattern paper. 
Add to inside with elastic tie! 

BACK INSIDE COVER!

Create hidden pockets using Steampunk Debutante Epherema Cards. 
Fussy cut around images to create tags. 
Add to formed pockets. 

OUTSIDE COVERS OF ORGANIZER!

Die cut two of the Trinket Box  cover with pattern paper. Adhere one to top of Desk Organizer. (Make sure to leave a 2″ over hang; refer to photo above on how to decorate.) 
Wrap net ribbon around Desk Organizer and though the Ornate Metal Handle. 
Tie bow. 


Add second decorated  Trinket Box lid to top of ret ribbon. 
Decorate oval from the  Trinket Box with Ephemera Card and butterfly.

Die cut Heart and Soul Flower from pattern paper. 
Form flowers; adhere together and place on front of Desk Organizer. 

 I hope you are ready to “Take Flight” and create your own Desk Organizer using Eileen Hull’s fabulous dies from Sizzix! 

Eileen Hull Designs/Sizzix Supplies:
662359 Stamp and Photo Storage Die
662360 Book and Pages, Trinket Box and Frame Die
662361 Card Box, Planner Organizer and Storage Die
661906 Journal Die
661108 Heart and Soul Flower Die
657123 Caddy Box 

Other Supplies:
Graphic 45 Steampunk Debutante Collection
Colorbox Blends Nutmeg Ink
Scallop Flower Punch
Stylus and Soft Mat
Xyron Creative Station with Permanent Adhesive
Glue Gun
MayArts Ribbon and Twine

Follow You Dreams Organizer with Eileen Hull Inspirational Team

Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull’s Inspiration Design Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.

Hello to all our amazing Eileen Hull Fans!
Today I am sharing this fabulous Follow Your Dreams Organizer using Eileen Hull’s Card Box, Planner Storage & Organizer and

Begin by first die cutting the Card Box, Planner Storage & Organizer from mat board and pattern paper. Adhere pattern paper to front of formed box.

Lay stencil on front of prepared Organizer apply Crackle Paste to top of stencil using palette knife. 

Die cut oval from the Book & Pages, Trinket Box & Frame, cover with pattern paper. Fussy cut second image and layer with pop dots.

Add paper doily to front of prepared Organizer. Add prepared oval to front of doily along with die cut scallop circle and label from the Bookplate, Hinges & Labels.

Add a few flowers to front along with small chipboard piece.

Add a metal handle from your local hardware store to end of Organizer. Add bow to handle.

Add a few more flowers to the handle. I hope you are inspired to check out all of Eileen’s Book Club Dies on the Sizzix Site! You will fall in love with how interactive they are with all dies! Make sure to stop by Eileen Blog to see the fabulous Inspirational Teams projects for the week! Hugs Pam 

Supplies:
Graphic 45 Fairy Dust Collection
MayArts Ribbon
Paper Doily
Metal Handle
Flowers
Tim Holtz Stencil
Crackle Paste
Palette Knife
Adhesive 
Pop Dots


Journal Treasury




Eileen Hull's Die Cutting Magic EBook



GIFTS TO DIE FOR with Eileen Hull and friends


Gifts to Die For

Fairy Dust Trinket Frame with Eileen Hull Inspiration Team

 Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull’s Inspiration Design Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more here.
Happy New Years!!!! 
Are you excited for 2018!!!
I AM…
SO…
Let’s begin the year with spreading a bit of Fairy Dust around using Eileen Hull’s 

Form box; adhere Graphic 45 Fairy Dust papers to the inside and outside of box. 
Add Fairy Dust Epherema Journal Cards to inside. 

Adhere pattern paper to front of XL Book; Pages, Trinket Box & Frame along with “Friend” sentiment from the Floral Arch & Words Framelits Die.
Die cut flowers Book Mark, Tag & Pocket Framelits Die ; form flowers with brads. Add to front of prepared box. 

Add small knob and ribbon to top of box. 

Die cut  Book Mark, Tag & Pocket Framelits Die ; adhere to front of box. 
Place tag inside of pocket to finish box. 

Add prepared Fairy Dust Trinket Box to top of wooden spool. 
Adhere a few more flowers and leaves to spool. 

I hope you are inspired to check out all of Eileen’s Book Club Dies on the Sizzix Site! 
You will fall in love with how interactive they are with all dies! 
Make sure to stop by Eileen Blog to see the fabulous Inspirational Teams projects for the week!
Hugs Pam 
Supplies:
Graphic 45 Fairy Dust Collection
MayArts Ribbon
Wood Spool
Clear Door Knob
Antique Brads

Journal Treasury


Eileen Hull's Die Cutting Magic EBook


GIFTS TO DIE FOR with Eileen Hull and friends

Gifts to Die For

Hello Beautiful Trinket Box Set and Tutorial with Eileen Hull’s Inspriation Team

Disclaimer Notice: I’ve received products/compensation as part of the Eileen Hull Inspiration Team. This project however, is 100% my own project! Some of the links in this post are affiliate links. I explain more HERE!.

Hi everyone! 
Are you getting excited about Eileen Hull’s newest dies from the Book Club Collection.
Today I created this a fabulous Trinket Gift Set with Gift Card holder from the Book and Pages, Trinket Box and Frame which you can find on the Sizzix site.

Begin your trinket box by cutting a set out of Sizzles Mat and pattern paper.
Form trinket box; ink edges with Nutmeg Colorbox Blends
Adhere pattern paper to chipboard.
Adhere trinket box together.

Add trim and twine to outside trinket box.
Add brad to trinket box front.

Place Epherema Card behind opening of trinket box prior to covering with inside paper.
Add trim to opening along with fussy cut images and brad.

Add flowers and ribbon to hold trinket box closed.

Add wooden beads to bottom of trinket box.

Die cut Needlepoint Book from mat board and pattern paper.

Add a two of the Epherema cards to inside of Needlepoint Book.
Add trim.

Thanks so much for stopping by today!
Pam

Supplies: